Microcement Floor and Wall Kit
With the 10 square metre microcement floor and wall kit -which is a combined, high-quality multi-layer coating system– you can create minimalist and contemporary surfaces on floors, walls and ceilings. Our microcement is arguably the easiest to apply on the UK market, with an amazing cost/value ratio, that includes more material than any other similar system to make sure you have ample microcement to create a durable, waterproof finish on floors, walls and even ceilings!
With our microcement floor and wall kit can create seamless, waterproof and durable finishes in kitchens and living rooms, bathrooms and even in shower cubicles. You won’t need to worry about maintenance as the resin will ensure that water will not penetrate and the coating will last.
If you’d like to see real, hand applied sample boards, check out our Microcement Mood Board Set, showing the stunning contemporary colours from our ‘Colours of Britain’ range.
Our Microcement wall and floor kit now can be further enhanced with the ultra-durable protector system TOP ART. TOP ART not only makes the coating harder, but also more heat resistant.
If you choose our microcement pack you can select from 15 colours which can be further modified and personalised for you to provide you with an almost infinite number of shades (for details contact our sales team). These microcement colours were developed in London and are based on the most requested and popular contemporary colours.
Unlike any other provider our colours presented on our site are as close to the real ones as possible and show the look of the real finish.
For a complete list of numbers and respective names of microcement colours please click on the ‘Specifications and Application’ tab.
Tools for Microcement
With this microcement kit you’ll have a lightweight flooring solution on 2 to 3mm, but more importantly, it can also be applied with some added preparation on furniture. You can further customise this system with satin or matt protectors, applied by roller, to create a long-lasting finish.
Click here to see our pdf microcement colour chart.
Why Use Microcement
The distinctive advantages of our microcement system:
- You will purchase from the most established UK retailer of specialist finishes, based in London. This is not a cheap direct export product missing key components.
- You will have the state-of-the-art, durable and easy to apply coating that lasts
- You’ll have a FULL BUCKET of ready-mixed top (decorative) coat for every 10 msq with colourants already added (no measuring is needed, colour accuracy is high), with a very long shelf life
- You’ll use an Industrial-level system from the largest specialist producer in Italy
- You can complete projects in only three days
- You can apply it on top of underfloor heating, cover furniture and create durable and waterproof bathroom finshes
Finally, beside enhancing modern homes and business environments with microcement finishes you can also renovate existing surfaces like ceramic surfaces, porcelain tiles, mosaic, natural and reconstructed stone, linoleum, parquet and other coatings like epoxy or polyurethane resins, just to name a few.
The 10 msq kit includes the following products
|Atomo||Primer for porous surfaces||1L|
|Continuo Base||Base coat||25Kg|
|Continuo Deco||Decorative coat||15Kg + 5Kg|
|Continuo Link||Sealer||0.1L + 0.05L|
|Continuo Top||Resin||1.25L + 0.375L|
|Mesh||For the base coat||12 msq|
Don’t forget to purchase PRO LINK seperately for non-absorbent surfaces as it’s not included in the kit!
How to Apply Microcement
The application method is simple and straightforward, you should apply one coat after the previous one is dry enough. Please see the below table for further details:
|Step||Product||Layer||When?||Tool||Diluted / Mixed|
|0||Atomo or Pro Link||Only one||Create a bonding coat on porous OR non-absorptive surfaces||Roller or brush||Should be diluted 30%;|
300 ml of water to 1L of Atomo. Pro Link doesn’t need to be diluted.
|1||Continuo BASE||First of two||4-6 hours after step 0||Stainless steel or plastic trowel||Mixed with water; 5-6L to 25Kg|
|1a||Mesh||Directly embed in the 1st coat of Continuo BASE|
|2||Continuo BASE||Second of two||3 hours after step 1||Stainless steel or plastic trowel|
|3||Continuo DECO*||First of two||At least 3 hours after step 2||Stainless steel or plastic trowel||Component A mixed with B; cca 330g of B to 1Kg of A|
|4||Continuo DECO*||Second of two||At least 3 hours after step 3||Stainless steel or plastic trowel|
|5||Continuo LINK||Only one||At least 12 hours after step 4||Roller||Link A and B mixed with water; 1 unit of B to 2 units of A mixed with 12 units of water. Eg. 100ml of A to 50ml of B with 600ml of water.|
|6||Continuo TOP||First of two||At least 6 hours after step 5||Roller||Top A and B mixed with water; 1 unit of B mixed with 3.3 units of A with cca 0.45 units of water. Eg. 1.25L of A mixed with 375ml of B with 163ml of water.|
|7||Continuo TOP||Second of two||At least 3 hours after step 6||Roller|
|Light traffic||24 hours after step 7|
|Fully usable||5 days after step 7|
*Continuo Deco coats can be coloured. On walls/ceilings ‘Continuo BASE’ doesn’t need to be applied, but make sure thermal and mechanical movement has been accounted for.
How to Apply the TOP ART micro cement protector
|4||Continuo TOP ART Satin+||First of two||At least 6 hours after step 3||Roller||Top A and B mixed with water; 1 unit of B mixed with 3.3 units of A with cca 0.45 units of water. Eg. 1.25L of A mixed with 375ml of B with 163ml of water.|
|5||Continuo TOP ART Satin+||Second of two||At least 3 hours after step 4||Roller|
The ultra-matt TOP ART needs to be diluted less than the other protectors.
|4||Continuo TOP ART Ultra Matt+||First of two||At least 6 hours after step 3||Roller||Top A and B mixed with water; 1 unit of B mixed with 4 units of A with cca 0.5 units of water. Eg. 1.25L of A mixed with 312 ml of B with 150ml of water.|
|5||Continuo TOP Ultra Matt+||Second of two||At least 3 hours after step 4||Roller|
Moreover, when you choose this system you’ll be using a formaldehyde free, water-based and low VOC solution. Our microcement products were classified as A+ (the best rating) Emission Rating (‘Emissions dans L’air Interieur’) by the French government.
|Components in Micro cement kits|
|Beton cire kit||Wall kit||Wall & Floor kit||Sample kit|
Impera Italia’s Advice™
If you sand the coats and apply this finish with a plastic trowel you can eliminate most of the movement and can actually achieve a microcement finish with no or little movement!
Microcement products derive their strength not only from the nature of the mineral-, micronised cement base and their compactness, but also from the reinforcing effect of the resins.
A: Yes, it can be, when you apply it properly it will create a durable and waterproof coating that needs very little maintenance.
Q: Can you apply microcement on tiles / mosaics?
A: Yes, you can. On the other hand, please be aware that you need to apply Pro Link instead of Atomo as tiles / mosaics are non-porous and non absorptive.
Q: Can microcement be applied on floors?
A: Yes, it’s the ideal product to create a contemporary look for private properties or small businesses. Make sure to apply an extra protective coating of wax and maintain the finish in case you expect higher traffic.
Q: Can the micro cement system be applied on underfloor heating? Do I need to turn off the underfloor heating before we start to apply microcement?
A: Yes, this contemporary flooring system can be applied on top of underfloor heating, but please make sure to turn it off before the application. Also, make sure to wait 2 weeks (14 days) before you turn it back on!
Q: How durable is your micro cement? Is it scratch proof?
A: Your micro cement coating becomes extremely durable once it achieves it’s complete hardness (7 to 21 days), however, it hardens very quickly and can be walked on after a day. For further information on the hardness please see the manual.
Q: Can I mix the A and B components of the micro cement sealer and sealant in a plastic container?
A: Yes, you can. Please be aware that they only retain their workability for about an hour after you’ve mixed them.
Q: How accurate and resistant are your colours ?
A: Our colours are very accurate and resistant due to the nature of the finish and the composition of the pigments.
Q: Can I leave out some parts of the system and still get the same look / finish quality?
A: No, you shouldn’t. This system is proven to work as it is, with the base and top coat, sealer and sealant. We strongly advise against changing the method or materials or leaving out any steps.
Q: What do we have to do if one day we want to re-do the wall or floor?
A: You should sand the microcement finish and prime it before applying another coating (plaster, paint, wallpaper or tiles) on it.
Q: Do I need a specialist to apply microcement?
A: You should make sure this beton cire is applied by someone with experience and/or training due to the fact that it has to be prepared and executed differently than most standard coatings. Microcement coatings are not a DIY products!
Q: What’s the shelf life of your microcement?
A: If you store it under the correct conditions the ready-mixed product stays applicable for at least 2 years, sealers and sealants for a year and the powder for 3+ years.