Skip to content

Free delivery on our Impera Italia colour charts and sample pots!

Shop Here
Continuo Microcement Range
  • Continuo Microcement System for 10sqm

Continuo Microcement System for 10sqm

Regular price From £360.00

Continuo Microcement is a multi-layered coating system designed to be applied on domestic walls, floors and ceilings. Microcement provides a seamless coating that can enhance any room. It does not require any grouting and can be applied directly onto existing solid floors or tiles. This makes it a fantastic way to renovate any bathroom whilst creating uninterrupted, natural surfaces that are sure to modernize any environment.

The page below will guide you through all the components of the kit, as well as explain what each one is.

  • Waterproof
  • Completely Seamless Design
  • Versatile For Multiple Finishes
  • Durable and easy to maintain
  • Sold in kit form for simplicity
  • Can be applied directly over tiles
5

Specifications

Complete Microcement application:

Primer - This can be the Atomo Primer which is suitable for porous substrates including cement boards, Aqua panels and Plywood. It can also be the Prolink primer which is suitable for non-absorbent substrates such as tiles, metal or glass.

ANTICRACK SYSTEM (SOLD SEPARATELY):

The anticrack system is composed of the Continuo Base basecoat, as well as 168gr glass fibre mesh. Depending on where the product is being applied, the anticrack system is a hugely important component that will prevent any cracking of the substrate.

Deco A+B - These 2 components make up the plaster, that will provide the colour and look to the whole application. Deco A, is the main plaster which is coloured to the desire shade. Deco B is a powder which is mixed into the Deco A to begin the hardening process.

Link A+B - Link is a bi-component penetrating pre sealer that slightly darkens the plaster. The final colour will only be achieved once the Link component has dried. Link A is mixed with Link B, and a measure amount of water is added before being applied in a single coat.

TOP A+B - The Top component is the main protector of the Microcement system. A proper application of the system is not completed until at least 2 coats of Continuo TOP have been applied. Top A is mixed with Top B and a measured amount of water is added before the mixture is applied.

Disclaimers

  • The Microcement system should only be applied by applicators that have prior experience with these types of coating systems. There are multiple layers to be applied, and each of the components require some level of mixing or manipulation in order to prepare the material. We recommend having mixing scales to hand when preparing material, to ensure that the mixing quantities are adequately adhered to.

  • An application guide can be found on our YouTube channel, or alternatively, a PDF can be found at the bottom of this page. We strongly advise that you contact us prior to ordering this product if you have any doubts or concerns about an upcoming project.

  • Although our Microcement is a strong, and durable system, it carries with it certain limitations. We discourage from applying this material in areas that are likely to be prone to heavy staining such as hair salons, or coffee bars. We also do not recommend this product for use in commercial flooring environments as heavy foot traffic will accelerate the degradation of the product. If you have any reservations as to whether this product is right for you, please give us a call ahead of ordering the system.

Need Help Comparing?

Need Help?

Continuo Microcement Range
Build your kit

Primer selection

Please select the required primer:

Atomo - For porous substrates. 1L included as part of the kit.

Prolink - For non-porous substrates. This specialized primer can take the place of Atomo in the kit for an additional cost.

Build your kit
  • DISCOUNTED Continuo Anticrack System For Microcement - Hard wearing Cementitious basecoat for Microcement with Glass fibre Mesh

Is an Anticrack System required?

Optional - Recommended

The anticrack system is applied to prevent any movement of the substrate, from cracking the Microcement application. This is especially important in new builds, where foundations may still be settling in. If purchased as part of a microcement kit, an additional discount is applied.

*On floor areas or wet areas such as shower floors & walls, the anticrack system MUST BE APPLIED.*

This anticrack bundle contains:

1x 25kg Continuo Base basecoat.

1x 12m of 168gr fibreglass mesh.

Individual System Components
Build your kit
  • Continuo Deco Component A - Decorative Plaster For Microcement In Selected Colour (Requires Deco Component B)

Decorative Coat

Deco Component A

Deco Component A is the main plaster component of the Microcement system. This 15kg Bucket of material contains the desired colour for the application, and is prepared in house by us. This means that the colour will be ready when you receive the material.

Included as part of the kit.

Deco Component B

This is a 5kg bag of powder that is mixed into the Deco A in order to achieve a working consistency, and eventually harden the plaster. This component is the same regardless of which colour is selected for the Deco A.

Included as part of the kit.

Continuo Microcement Range
Build your kit

Link - Pre-sealer

Link Component A

Link Component A is the first part of this 2-part pre-sealer. The pre-sealer is applied onto a dry second coat of plaster, to penetrate and seal the pores of the application. This step darkens the finish finish slightly, meaning that only after this step, the full colour of the application can be appreciated.

Included as part of the kit.

Link Component B

Link Component B is mixed together with Link Component A and additional water is added. This creates the complete mix of pre-sealer that is then rolled over the decorative coat.

Included as part of the kit.

Continuo Microcement Range
Build your kit

TOP - Finishing Sealer

Top Component A

TOP Component A is the part of the system that determines the sheen level of the final application. Available in Matt, Satin or Gloss. This is also the most important component as it offers the main protection against water and wearing of the surface.

Included as part of the kit.

TOP Component B

TOP Component B is mixed together with TOP Component A and additional water is added. At least 2 thin coats must be applied in order to complete the application. If any spare is available, we recommend doing a further coat to enhance the level of protection. Multiple thin coats are better, than less, thicker coats.

Included as part of the kit.

  • Continuo Microcement System for 10sqm

Order Summary



SUB TOTAL

Continuo Microcement System for 10sqm

£360