ALLOVER Smooth Floor and Wall Kit
The ALLOVER flooring and wall kit is specifically designed to provide a seamless surface that is both waterproof and durable.
By following the application instructions, you can create seamless, waterproof, and durable finishes in various areas of your home. One of the advantages of the ALLOVER system is that it can easily be applied directly on-site, without any previous preparation in most cases. They can be applied directly onto different surfaces, including concrete floors and old ceramic floors and walls. This flexibility makes it convenient for renovation projects where existing surfaces are present.
ALLOVER prioritizes technical performance, offering qualities such as excellent adhesion, high mechanical strength, and resistance to foot traffic. These attributes contribute to the durability and long-term performance of the system, making it suitable for residential applications.
Please remember that if the surface is not absorptive at all then use Pro Link as a primer.
However, there are limitations to the use of ALLOVER systems. It is not suitable for areas with trolley traffic or those used for industrial purposes, such as workshops, warehouses, wholesale facilities, and supermarkets. Additionally, it should not be applied in loading and unloading areas that require the use of trolleys, pallet trucks, forklifts, or similar equipment. Furthermore, it is not recommended for outdoor areas, areas adjacent to swimming pools, and areas used for car parking.
If you’re interested in enhancing the texture of your wall, check out our ALLOVER Floor and Wall Textured Kit.
If you’d like to test the quality of our microcement check out our ALLOVER sample kit you will be able to cover roughly 1 sqm.
ALLOVER Smooth Floor & Wall Kit Components
Atomo is a water-based wall fixative that is completely solvent-free, offering excellent penetration, making it particularly well-suited for enhancing and stabilizing both indoor and outdoor (mineral) surfaces.
Continuo Base is a cement-based powdered anti-crack coating infused with resins, designed for use in conjunction with our micro cement systems. It serves as a foundational layer for decorative microcement applications, providing a combination of strength and flexibility to not only enhance the visual appeal but also extend its durability. Prior to applying this plaster, apply Atomo if the substrate is absorbent, or use Pro Link as a primer if it is not.
ALLOVER Finish (Decorative Coating) is a spreadable paste material that has been designed for use exclusively over horizontal and vertical coatings made with others to be used over specific coatings using ALLOVER spreadable products.
If you would like to achieve a smooth, minimalist, and less textured look, then you should use ALLOVER FINISH. This product is specially designed to adhere well to various substrates, including concrete, old resin floors, and tiles, and is easy to work with during application. Additionally, ALLOVER FINISH can be colored using a tinting system for customization.
Residential and Commercial Spaces: Suitable for homes, offices, retail stores, and other indoor environments that demand a refined finish.
ALLOVER Top is a transparent water-dilutable protective coating specifically designed for use with the ALLOVER SYSTEM. It gives a satin look to the coated surfaces, enhancing their appearance while providing essential protection. This protective coating offers high resistance to water, hot and cold liquids, and various substances commonly used in residential and catering settings.
Tools for ALLOVER
To create an outstanding look with our ALLOVER floor and wall kit you will need a Venetian plastering trowel, and putty knife (various sizes). While a plastic trowel can be used to create a slightly textured effect, it also serves the purpose of preventing any potential discoloration.
With this ALLOVER kit, you’ll have a lightweight flooring solution of 2 to 3mm, but more importantly, it can also be applied with some added preparation on furniture. You can further customise this system with its satin protector applied by roller, to create a long-lasting finish.
Other factors to consider: Corner beads, Stop beads, Reveal beads
Why Use ALLOVER
The distinctive advantages of the ALLOVER system:
- You will purchase from the most established UK retailer of Italian decorative specialist finishes, based in London.
- You will have original, hand-applied, and durable wall and floor coating that lasts.
- You’ll have a complete ALLOVER system for every 10 sqm with colourants already added (no measuring is needed, colour accuracy is high), with a two-year shelf life.
- You’ll use an approved ALLOVER system from the largest decorative products specialist producer in Italy
- You can complete projects in only three to five days depending on which kit you purchase. (scope of works, preparation, complexity of work, and working place conditions can extend this time frame significantly)
- You can apply it on top of underfloor heating (see more details in the manual), cover furniture, and create durable and waterproof bathroom finishes
- You will have our technical support before and after purchase. Technical training can be also provided.
- You can purchase only a 1 sqm kit for sampling or patching.
Apart from enhancing contemporary residences and commercial spaces with ALLOVER finishes, you can coat over pre-existing tiled surfaces such as porcelain tiles, mosaics, natural and engineered stone, as well as other coatings like epoxy or polyurethane resins, among various others, to change their overall look.
The 10 sqm kit includes the following products
| Atomo | Surface Stabilizer | 1L |
| Continuo Base | Base coat | 25Kg |
| Fibreglass Mesh | For the base coat | 12 SQM |
| ALLOVER Finish | Decorative coating | 20Kg |
| ALLOVER Top | Protector | 1.25L |
Please be aware that corner beads, stop beads, and reveal beads are not included in the Kit.
How to Apply ALLOVER
The application method is simple and straightforward, you should apply one coat after the previous one is dry enough. Please see the below table for further details:
| Step | Product | Layer | When? | Tool | Diluted / Mixed |
| 1 | Atomo | One coat | Create a bonding coat on porous OR non-absorptive surfaces | Roller or brush | Should be diluted 30%; 300 ml of water to 1L of Atomo. Pro Link doesn’t need to be diluted. |
| 2 | Continuo Base | One of Two | Create a bonding coat on porous OR non-absorptive surfaces | Stainless Steel Trowel | Mixed with water; 5-6L to 25Kg |
| 3 | Fibreglass Mesh | Directly Embed in the first coat of ALL Base | |||
| 4 | Continuo Base | Second of Two | 4 hours after step 2 | Stainless Steel Trowel | |
| 5 | ALLOVER Finish | One of Two | 4 hours after step 3 | Stainless steel | Ready to use.
Possible to dilute with 5% water. |
| 6 | ALLOVER Finish | Two of two | At least 4 hours after step 4 | Stainless steel |
Ready to use. Possible to dilute with 5% water. |
| 7 | ALLOVER Top | First of two | At least 3 hours after step 5 | Roller | 0-15% with water |
| 8 | ALLOVER Top | Two of two | At least 3 hours after step 6 | Roller | 0-15% with water |
| Light traffic | 24 hours after step 7 | ||||
| Fully usable | 5 days after step 7 |
Don’t forget to purchase PRO LINK separately for non-absorbent surfaces as it’s not included in the kit!
If you want, you can sand each plastering coat. Please note that this is optional!
