Beton Cire System for 10sqm
Our Beton Cire system is a multi-layered coating system designed to be applied on interior domestic walls and ceilings. Beton Cire is an adaptation of one of our best-selling systems, Microcement; this combination of products can only be used in areas which are not exposed to any type of moisture. This system has been designed with the Microcement look in mind, helping achieve a seamless coating at an attractive cost. This kit consists of all the Microcement components EXCEPT the final Top Resin, instead you will be provided with Wax D’arte.
The page below will guide you through all the components of the kit, as well as explain what each one is.
If you are interested in a water-resistant finish, please use the following links to access our Continuo Microcement as well as our mono-component Allover Micro-Coating System.
- Completely Seamless Design
- Versatile For Multiple Finishes
- gloss finish
- Sold in kit form for simplicity
Specifications
Disclaimers
Need Help Comparing?
Need Help?
Primer selection
Please select the required primer:
Atomo - For porous substrates. 1L included as part of the kit.
Prolink - For non-porous substrates. This specialized primer can take the place of Atomo in the kit for an additional cost.
Is an Anticrack System required?
Optional - Recommended
The anticrack system is applied to prevent any movement of the substrate, from cracking the Microcement application. This is especially important in new builds, where foundations may still be settling in. If purchased as part of a microcement kit, an additional discount is applied.
*The Beton Cire Kit is not suitable for floors or wetroom applications* As it does not include the protective resin.
This anticrack bundle contains:
1x 25kg Continuo Base basecoat.
1x 12m of 168gr fibreglass mesh.
Decorative Coat
Deco Component A
Deco Component A is the main plaster component of the Microcement system. This 15kg Bucket of material contains the desired colour for the application, and is prepared in house by us. This means that the colour will be ready when you receive the material.
Included as part of the kit.
Deco Component B
This is a 5kg bag of powder that is mixed into the Deco A in order to achieve a working consistency, and eventually harden the plaster. This component is the same regardless of which colour is selected for the Deco A.
Included as part of the kit.
Link - Pre-sealer
Link Component A
Link Component A is the first part of this 2-part pre-sealer. The pre-sealer is applied onto a dry second coat of plaster, to penetrate and seal the pores of the application. This step darkens the finish finish slightly, meaning that only after this step, the full colour of the application can be appreciated.
Included as part of the kit.
Link Component B
Link Component B is mixed together with Link Component A and additional water is added. This creates the complete mix of pre-sealer that is then rolled over the decorative coat.
Included as part of the kit.
Wax D'arte - Finishing Protector
Wax D'arte
This is the final step of the Beton Cire application. This synthetic wax is applied on 1 coat and will provide a protective layer to your final finish, with a glossy effect.
This wax is a crucial element that contributes to the glossiness which is associated with the 'Waxed Concrete Effect' also known as Beton Cire.
Included as part of the kit.
Order Summary
SUB TOTAL
Beton Cire System for 10sqm
£288
Why Buy?
Features & Benefits
01 Documentation
02 Microcement Application Video