Allover System With Anticrack For Floors with Protego (Textured Finish) 10sqm Kit Suitable For Floors & Walls

• The Allover Textured Kit With Anticrack For Floors & Walls For 10sqm includes:

- 1x 20kg Allover Base (2 Coats)

- 1x 12m Roll of Mesh

- 1x 10kg bucket of Allover Base (1 Coat)

- 1x Bundle of Link Component A + B for 10sqm (1 Coat)

- 1x Bundle of Protego Component A + B For 10sqm (2 Coats)

Complete Allover application with anticrack (For Floors & Walls):

• Primer - The Allover system does not typically need a primer, this is because its components have very good natural adhesion. It is important to know that on some substrates, especially non-porous, or slippery surfaces, a primer should still be used. This would most likely be the Prolink primer.

• Allover Base - This is used to create the anticrack system. One coat is applied, with the mesh pressed into it whilst still wet. This layer is then smoothened. A second layer is then applied to conceal the mesh and complete the anticrack, once the first is dry. This kit has been designed for a 2 coat application of the Base, to cover 10sqm. As this is the textured kit, Allover Base will be the finishing plaster, although a 3rd coat will be done to ensure we can achieve the right texture.

• Allover Base - The same plaster we used for our Anticrack will now act as the textured finishing plaster for this application of the Allover System. Allover Base provides a seamless, textured finishing coat that is uniform in visual texture and creates a delightfully uninterrupted finish on floors & walls, whilst keeping to the same shade of colours available with the Allover Finish.

• Link A+B - This bi-component penetrating pre sealer that slightly darkens the plaster. Link A is mixed with Link B, and a measure amount of water is added before being applied in a single coat.

• Protego A+B - This bi-component sealer is designed to be applied on 2 coats, on top of the Link to provide a waterproof finish, this will also slightly shift the shade of the final colour. The Protego protector combined with the Continuo kit, creates a system that is suitable for medium traffic commercial projects. Available in Matt, Satin and Gloss.

• This Allover kit includes the anti-crack system which makes it suitable for application on walls, as well as floors.

• The Allover System should only be applied by applicators that have prior experience with these types of coating systems. There are multiple layers to be applied, and each component should be understood before it is applied.

• Although Allover is a strong, and durable system, it carries with it certain limitations. We discourage from applying this material in areas that are likely to be prone to heavy staining such as hair salons, or coffee bars. We also do not recommend this product for use in certain commercial flooring environments as heavy foot traffic will accelerate the degradation of the product. However, the system can be applied in medium traffic commercial areas. If you have any reservations as to whether this product is right for you, please give us a call ahead of ordering the system.

• Although the Allover System does not require a primer as part of the manufacturer recommendation, we would still recommend for one to be use on particularly slippery, or non-porous surfaces.

• Please note that there is a pre-sealer which must be applied (Link). The Link A and Link B must be mixed together, with a ratio of water. Link should be applied on one coat with a roller. The final resin (Protego), also has two components that must be mixed together before it is applied onto a surface. This product should be applied on two coats. This whole process should be done fairly carefully, as not following instructions can affect the composition, and therefore durability of the resin.