Continuo Microcement System for 10sqm with Protego protector
Continuo Microcement with Protego is a multi-layered coating system designed to be applied on walls, floors and ceilings in domestic and medium traffic commercial projects. Microcement provides a seamless coating that can enhance any room. It does not require any grouting and can be applied directly onto existing solid floors or tiles (the anti-crack system is mandatory for floors and highly encouraged for walls). These benefits, make it a fantastic system to use for not only wet room areas, but also floors and worktop surfaces, creating an uninterrupted modern look.
This kit consists of Protego (two component sealer) which will slightly shift the colour of your Microcement (therefore will be slightly darker than the Microcement Moodboard Set). This shift is very moderate, but the level of protection offered from the combination of the Continuo Kit with Protego has been crafted to cater to the more demanding projects.
The page below will guide you through all the components of the kit, as well as explain what each one is.
- Waterproof
- Completely Seamless Design
- Versatile For Multiple Finishes
- Durable and easy to maintain
- Sold in kit form for simplicity
- Can be applied directly over tiles
Specifications
Disclaimers
Need Help Comparing?
Need Help?
Primer selection
Please select the required primer:
Atomo - For porous substrates. 1L included as part of the kit.
Prolink - For non-porous substrates. This specialized primer can take the place of Atomo in the kit for an additional cost.
Is an Anticrack System required?
Optional - Recommended
The anticrack system is applied to prevent any movement of the substrate, from cracking the Microcement application. This is especially important in new builds, where foundations may still be settling in. If purchased as part of a microcement kit, an additional discount is applied.
*On floor areas or wet areas such as shower floors & walls, the anticrack system MUST BE APPLIED.*
This anticrack bundle contains:
1x 25kg Continuo Base basecoat.
1x 12m of 168gr fibreglass mesh.
Decorative Coat
Deco Component A
Deco Component A is the main plaster component of the Microcement system. This 15kg Bucket of material contains the desired colour for the application, and is prepared in house by us. This means that the colour will be ready when you receive the material.
Included as part of the kit.
Deco Component B
This is a 5kg bag of powder that is mixed into the Deco A in order to achieve a working consistency, and eventually harden the plaster. This component is the same regardless of which colour is selected for the Deco A.
Included as part of the kit.
Link - Pre-sealer
Link Component A
Link Component A is the first part of this 2-part pre-sealer. The pre-sealer is applied onto a dry second coat of plaster, to penetrate and seal the pores of the application. This step darkens the finish slightly, meaning that only after this step, the full colour of the application can be appreciated.
For 10sqm, 0.1L is included as part of the kit.
Link Component B
Link Component B is mixed together with Link Component A and additional water is added. This creates the complete mix of pre-sealer that is then rolled over the decorative coat.
For 10sqm, 0.05L is included as part of the kit.
Protego - Finishing Sealer
Protego Component A
Protego Component A is the part of the system that determines the sheen level of the final application. Available in Matt, Satin and Gloss. This is also the most important component as it offers the main protection against water and wearing of the surface.
Protector will shift the final colour of the finish and make it slightly darker.
For 10sqm, 1.67KG is included as part of the kit.
Protego Component B
Protego Component B is mixed together with Protego Component A. At least 2 thin coats must be applied in order to complete the application. If any spare is available, we recommend doing a further coat to enhance the level of protection. Multiple thin coats are better, than less, thicker coats.
For 10sqm, 0.33KG is included as part of the kit.
Order Summary
SUB TOTAL
Continuo Microcement System for 10sqm with Protego protector
£420
Why Buy?
Features & Benefits
01 Documentation
Discover: