Skip to content

Free delivery on samples and colour charts!

Search 0 Open cart dialog

    Ecoresinas W TRP Resin Protective Resin For Microquartz Wall & Sink Systems

    Regular price £192.00

    Ecoresinas W TRP Resin is a colorless varnish based on water-based resins, cross-linkable with isocyanates, with excellent abrasion resistance, very good hardness and chemical resistance. It does not yellow and can be applied outdoors or indoors.
    STANDS OUT mainly for its high chemical resistance, impermeability and surface hardness. It is mainly indicated for high-traffic floors that have to withstand chemicals such as detergents, chlorine, bleaches, etc. , highly waterproof and excellent resistance to scratches and scratches.

    Specifications

    Coverage:

    • Approximately 1.2kg per 10sqm (2 coats). This is made up of 1kg of Finish W TRP Comp A, 200g of Finish W TRP Comp B

    Number of coats:

    • 2 coats.

    Dilution:

    • No dilution, instead the following mixture should be created (based on a 10sqm kit). 1.25L of Component A, 0.375L of Component B, 163ml of water.
    • The preparation ratio for Top is:

    Top A 3.33 : 1 Top B. The total volume is divided by 10 and this is how much water should be added.

    So 1.25L of Top A + 0.375L of Top B is 1.625L of solution. Now divide this number by 10 to make 162.5ml. (This is the amount of water to add (Rounded to 153ml)). This formula can be adjusted for any amount of Top that is to be prepared.

    Tools:

    • Foam roller.
    • Brush
    • Mixing blade.



    Storage:

    • At least 12 months in their original containers in dry and protected environments.

    Disclaimers

    • It is essential to use protective glasses and gloves during the application and mixing process. If the product comes into contact with
      your eyes, wash them immediately with plenty of water and go to an emergency doctor.
    • The surface must be dry, clean of grease and contaminants.

    • On cement, the surface must be completely set (>28 days) and free of moisture.
    • The temperature of the substrate must be higher than 12ºC and at least 3º above the dew point.
    • Shake the contents of the container before using it.

    Need Help Comparing?

    This product is only available to trained applicators. If you have been trained on this product, please log in to your account to purchase. If you cannot access your account, or are interested in becoming an approved applicator for this material, please contact the team on 02088305100 Between 8am-5pm, Mon-Fri.

    The Nitty Gritty

    Features & Benefits

      Discover:

      You May Also Like