Skip to content

Free delivery on samples and colour charts!

Search 0 Open cart dialog
  • Ecoresinas W TRP Radiant Resin - Protective Resin For Microquartz Floor Systems

Ecoresinas W TRP Radiant Resin Protective Resin For Microquartz Floor Systems

Regular price From £36.00

Ecoresinas W TRP Radiant Resin is a two-component varnish based on hydro-silated acrylic resin and aliphatic polyisocyanate in an aqueous environment. It is characterized by high resistance to stains produced by common household products.

It presents outstanding abrasion resistance and allows very easy polishing of its surface, used as a finishing coating for flooring systems such as MicroQuartz®, resins, and various industrial applications.

It is also suitable as a coating for multi-purpose skating areas in sports clubs, public institutions, and schools.

Specifications

Coverage:

  • Approximately 1.2kg per 10sqm (2 coats).

This is made up of:

  • 1kg of Finish W TRP Radiant Comp A
  • 200g of Finish W TRP Radiant Comp B

Number of coats:

  • 2 coats.

Dilution:

  • No dilution, instead the following mixture should be created (based on a 10sqm kit). 1.25L of Component A, 0.375L of Component B, 163ml of water.
  • The preparation ratio for Top is:

Top A 3.33 : 1 Top B. The total volume is divided by 10 and this is how much water should be added.

So 1.25L of Top A + 0.375L of Top B is 1.625L of solution. Now divide this number by 10 to make 162.5ml. (This is the amount of water to add (Rounded to 153ml)). This formula can be adjusted for any amount of Top that is to be prepared.

Tools:

  • Foam roller.
  • Brush
  • Mixing blade.



Storage:

  • Approximately 12 months in a heated area, in its original sealed container.

Disclaimers

  • It is essential to wear protective goggles and
    gloves during mixing and application. In case of
    contact with the eyes, rinse immediately and
    thoroughly with plenty of water and seek medical
    attention.
  • The surface can be carefully walked on after 24
    hours.

  • Full curing takes 15 days at a stable temperature of 25°C.

  • Work in shaded areas and do not apply under direct sunlight.

  • After 24 hours, sanding is required to ensure that recoating is
    safe.
  • The ambient and substrate temperature must be between 10°C
    and 25°C. Relative humidity must be below 80%. During
    application and drying, ensure good ventilation of the area
    while avoiding dust contamination.

  • The effectiveness of our products is based
    on research conducted in our
    laboratories and on years of experience in
    the field. We guarantee that the quality of
    work carried out with our products meets
    Ecoresinas standards, provided that our
    instructions are strictly followed and the
    application is properly executed. We
    decline all responsibility if the final result
    is influenced by factors beyond our
    control. The user must verify that the
    supplied product is suitable for its
    intended use and should perform a
    preliminary test whenever necessary. As
    technical developments are continuous, it
    is advisable to check that the product
    characteristics have not been modified in
    a subsequent edition.

Need Help Comparing?

This product is only available to trained applicators. If you have been trained on this product, please log in to your account to purchase. If you cannot access your account, or are interested in becoming an approved applicator for this material, please contact the team on 02088305100 Between 8am-5pm, Mon-Fri.

The Nitty Gritty

Features & Benefits

    Discover:

    You May Also Like