ALLOVER Smooth Wall Kit
The ALLOVER Wall Kit is designed to simplify the process of creating a beautiful smooth wall with ease. With just a few steps, you can achieve a seamless and beautiful finish!
The Smooth Wall Kit typically consists of the Atomo, ALLOVER Finish, and ALLOVER topcoat. It’s important to note that specific instructions may vary depending on the type of ALLOVER Kit being used. Always refer to the instructions provided with the kit for detailed guidance on application, drying times, and any additional steps or finishes.
Overall, the system provides a durable, visually appealing, and versatile solution for continuous walls in residential environments. Its excellent adhesion and high mechanical strength make it a reliable choice for long-lasting and aesthetically pleasing surfaces.
If you’re looking for a complete floor and wall system, please see our ALLOVER Smooth Floor & Wall Kit or ALLOVER Textured Floor & Wall Kit.
If you’d like to test our ALLOVER microcement, please check out our ALLOVER Sample kit (average coverage of 1 sqm).
Tools for ALLOVER
To achieve a compact polished concrete or cement look our ALLOVER should be applied using a Venetian plastering trowel, and putty knife (various sizes).
To apply the ALLOVER Top, you can use a gloss pile roller.
Why Choose ALLOVER
The conveniences of the ALLOVER wall system:
- You will purchase from the most established UK retailer of Italian decorative specialist finishes, based in London.
- You will have original, hand-applied, and durable wall coating that lasts.
- You’ll have a complete ALLOVER system for every 10 sqm with colourants already added (no measuring is needed, colour accuracy is high), with a two year shelf life.
- You’ll use an approved ALLOVER system from the largest decorative products specialist producer in Italy
- You can complete projects in only three to five days depending on which kit you purchase. (scope of works, preparation, complexity of work and working place condition can extend this time frame significantly)
- You can apply it on top of underfloor heating (see more details in the manual), cover furniture, and create durable and waterproof bathroom finishes
- You will have our technical support before and after purchase. Technical training can be also provided.
- You can purchase only a 1 sqm kit for sampling or patching.
Apart from enhancing contemporary residences and commercial spaces with ALLOVER finishes, you can coat over pre-existing tiled surfaces such as porcelain tiles, mosaics, natural and engineered stone, as well as other coatings like epoxy or polyurethane resins, among various others, to change their overall look.
The 10 sqm wall kit includes the following products:
| Atomo | Surface Stabilizer | 1L |
| ALLOVER Finish | Decorative Coat | 20Kg |
| ALLOVER Top | Protector | 1.25L |
The table below will provide you with guidance to enable a simple and straightforward application:
How to Apply ALLOVER on Walls
| Step | Product | Layer | When? | Tool | Diluted / Mixed |
| 1 | Atomo | One coat | Create a bonding coat on porous OR non-absorptive surfaces | Roller or brush | Should be diluted 30%; 300 ml of water to 1L of Atomo. Pro-Link doesn’t need to be diluted. |
| 2 | ALLOVER Finish | First of two | Stainless steel trowel | Ready to use. | |
| 3 | ALLOVER Finish | Two of Two | 4 hours after step 1 | Stainless steel trowel | Ready to use. |
| 4 | ALLOVER Top | First of two | At least 4 hours after step 2 | Roller | 0-15% of water. |
| 5 | ALLOVER Top | Two of two | At least 4 hours after step 3 | Roller | 0-15% of water. |
Don’t forget to purchase PRO LINK separately for non-absorbent surfaces as it’s not included in the kit!
If you want, you can sand each plastering coat. Please note that this is optional!
Impera Italia’s Advice™
If you’re looking for a polished concrete look that can be specified and applied easier than most Venetian plasters then don’t hesitate to choose our microcement finish.
